Fire Pumps, Parts, Motors – Outlook Enterprises, LLC has it all. When it comes to inspecting and repairing fire pumps, we have what you’ll need! Case gaskets, packing glands, swing bolt assemblies, pre-cut braided packing, relief valves, CLA-VAL’S, pressure gauges, slinger rings, lantern rings and packing removal tools. We sell new fire pumps, motors, rotating assemblies and complete fire pump units if needed. Outlook Enterprises, LLC stocks many of these parts for same-day pickup or shipping from our Denver, CO warehouse.
All pumps, regardless of the make or the conditions under which they operate, are equipped with packing boxes. These packings are designed to prevent air, water, oil or other liquids from escaping from the pump when rotating. Click here to see how pumps are used for high rise buildings.
At Outlook Enterprises we sell fire pump packing, case gaskets, packing glands, swing bolt assemblies, complete rotating units, new pumps, packing removal tools, etc. Most of which we have in stock at our Denver, CO warehouse.
One of the most common repair kits is a fire pump repack. The area where the shaft penetrates the outer casing of a fire pump needs to be sealed, so that water will not leak out of the pump. The seal at the point of penetration of the casing is known as the packing. When the packing needs to be replaced, the old packing is cleaned and scraped out of the housing, and new graphite packing (GFO) is installed. New gland bolts and nuts & washers will also be installed.
Additionally, we carry OEM parts for Allis Chalmers, Aurora, Fairbanks, Goulds, Peerless, etc.
Pressure & Relief Valves For Fire Pumps
Outlook Enterprises, LLC stocks Winter pressure gauges:
PFQ714 4″, 1/4″ NPT BTM 0-300 PSI/KPA
PFQ707 4″, 1/4″ NPT BTM -30-300 PSI/KPA
Outlook Enterprises, LLC stocks CLA-VAL Pressure relief control
20885302F 1/2″ & 3/4″ 55L-60/300, 100-300 3/4 BS 250S
20881504A 1/2″ & 3/4″ 55L-60, 20-200 3/4 BS 250S
Fire Pump Case Gaskets
Theses gaskets are pre-cut and sized for the exact pump you are working with. OEM parts for Allis Chalmers, Aurora, Fairbanks, Goulds, Peerless, etc.
Fire Pump Packing
Buy our pre-cut packing kits or bulk by the spool. We sell Packing cutting systems that will ensure that you can cut the perfect packing ring!
Why Maintenance is Vital on Fire Pumps?
Without proper fire protection equipment, thoroughly maintainted throughout your entire property, a small fire can quickly turn into a business- and life-threatening disaster. Proper maintenance of your fire protection system is mandatory, and for proper maintenance, you must inspect your system at regular intervals and make the necessary repairs in a timely, professional manner.
Without proper, regular maintenance, there’s no telling if your fire protection system will adequately protect your property from fire. Outlook Enterprises, LLC. can help you set up the best inspection intervals, and show you what to look for to ensure your fire pump when called on.
Fire Pump Inspection & Testing Guidelines:
- Regular testing (at least once a week) to verify that the building’s firefighting water system and fire parts are in good condition will help ensure proper fire pump function.
- It’s also important to check all minor components monthly, or every six months at minimum, to avoid major system failures.
- NFPA regulations stipulate that you test your fire pumps for at least 30 minutes each week. Testing can also help you avoid serious penalties.
From the purchase and installation of a new fire pump to the essential testing and maintenance, the Outlook Enterprises team would be delighted to assist you along the process. Because of the many connections we’ve formed across the United States and Canada, Outlook can supply any brand or type of goods. In addition, we have nearly 15 years of expertise in a wide range of industries, so please don’t hesitate to contact us if you have any queries.